Model PX3 is typically used with
a 5 metre long 150 mm diameter
Magnetic Hose Kit. The larger
PX4 with its greater flow and
pressure is suited to longer
lengths of hose or twin inlet
systems.
The Extractor can even be
mounted on wheels with a Flexi
Arm attached. These products
can be used to extract and/or
blow.
Ozone Pollution Extractors. An
outstanding combination of
quality, safety and value.
The operator can tailor a single product into any of these 3 configurations at any time. In-line flow is quiet and compact and gives a diffuse or concentrated outlet. Right angle flow removes the motor from the airstream and gives a concentrated outlet.
These purpose built Extractors are designed from the
ground up, placing primary importance on safety and
versatility.
Ozone Extractors incorporate a number of unique, innovative
design features, the most significant being the patented
triple flow system. This allows the Extractor to be site
assembled into three different configurations and highlights
the versatility that is the hallmark of the Ozone range.
Traditional right angle flow removes the motor from the
airstream. In-line flow is surprisingly quiet and compact.
The corrosion resistant case fully encloses the motor,
protecting it from damage and increasing safety for the
operator. Safety guards, carry handle and wheels are also
supplied as standard. An inbuilt silencer keeps noise levels
to a minimum.
The high performance rotors are dynamically balanced. The
backward inclined "self cleaning" blades ensure
performance remains consistently high.
Fixed Models PX3-F, PX4-F
Because they are designed as an
integral part of the Ozone range,
the Extractors connect directly to
Ozone Reels, Beams and Arms -
no other parts need to be ordered.
Both models feature the
patented Triple Flow System,
making them suitable for any
application. They
can be configured
on-site to
become either an
in-line centrifugal
or a right angle
c e n t r i f u g a l
Extractor.
Ozone's Fixed Pollution Extractors have a unique "all
enclosed" case which bolts directly to the mounting surface - no
need to order additional
brackets or adaptors. Flexi
Arms, in turn,connect
directly to the Extractor inlet.
Isolation mounts, spigots
and fasteners are all supplied
with the Extractor.
Complemented by a large
range of user friendly
accessories, the Ozone system
leaves little to chance.
Roof Models PX3-R, PX4-R
The finish is a polymer baked coating over zinc steel. All rotors
are dynamically balanced. All roof models can be operated
with or without ducting. When ducting is required it connects
directly to the 200 mm spigot supplied - a wide range of other
sizes is also available.
The operator can tailor a single product into any of these 3 configurations at any time. Vertical
Discharge is ideal for exhaust of heavily polluted air and Downward Discharge for exhaust of less
polluted air. The Supply Unit is ideal for providing fresh outdoor air, blown into the workspace.
These high pressure centrifugal Extractors are custom built
for roof mounting. By locating the Extractor out of the building,
noise levels are kept to an absolute minimum - ideal for low roof
workshops or classrooms. These fully corrosion and weather
protected units are extremely simple to install.
Like the portable and fixed stablemates, Ozone's Roof
Mounted Extractors can be configured in three ways -
vertical discharge, downward discharge and as a fresh air
supply unit - amazing three-in-one versatility.
Duct Kits
Roof Kit
Twin Flexi Arm systems are simple using an Ozone Duct
Kit. Everything is supplied in Kit form. Five sizes available
up to 6 m in length. Fixed Extractors bolt directly to the Duct
Kits. Alternatively, Roof Extractors can be used with a riser
duct to the roof. The US300 accessory is a unique flexible
hose section with the same profile as the Duct Kits - ideal
for bends around columns or corners.
The professional solution for discharging pollutant to
atmosphere. Simply connects to the outlet of a Fixed Extractor
and includes all necessary components including
conical roof sealer. The Kit has an overall length of 4 metres.
The roof pod discharges vertically and prevents rain from
entering the duct system.
Flexi Arms
Nozzles and Hose
Flexi Arms are the perfect partner for Ozone Pollution
Extractors. They are the only Arms on the market with absolutely no
flexible hose. With this "all
solid" design, high performance
and minimal maintenance are
guaranteed. With a 360° swivel
mounting plate, flexible
self-supporting joints and a
unique rotating inlet hood, the
Arm can be positioned anywhere
the operator wishes.
Ozone provides an amazing array of Nozzles and Hose for
use with Pollution Extractors. Magnetic, Suction and
Vehicle Exhaust Pipe Nozzles are available in various
diameters. Ozone Hose is suitable for welding fume, dust,
vehicle exhaust and low static applications.
Model PX3 is typically used with
a 5 metre long 150 mm diameter
Magnetic Hose Kit. The larger
PX4 with its greater flow and
pressure is suited to longer
lengths of hose or twin inlet
systems.
The Extractor can even be
mounted on wheels with a Flexi
Arm attached. These products
can be used to extract and/or
blow.
Because they are designed as an
integral part of the Ozone range,
the Extractors connect directly to
Ozone Reels, Beams and Arms -
no other parts need to be ordered.
them suitable for any
application. They
can be configured
on-site to
become either an
in-line centrifugal
or a right angle
c e n t r i f u g a l
Extractor.
order additional
brackets or adaptors. Flexi
Arms, in turn,connect
directly to the Extractor inlet.
are the only Arms on the market with absolutely no
flexible hose. With this "all
solid" design, high performance
and minimal maintenance are
guaranteed. With a 360° swivel
mounting plate, flexible
self-supporting joints and a
unique rotating inlet hood, the
Arm can be positioned anywhere
the operator wishes.
