Ozone is made from life-giving oxygen. The ozone permanently
removes odours by a process of oxidation and microbes by a
process of protein restructuring. Then, when it has done its
job, it automatically converts back into oxygen again. Ozone
is nature’s own powerful purifier. The ozone layer is essential
for life on earth and protects us from ultra violet rays. The
clean, fresh smell evident after a lightning storm is ozone.
(Fresh air in a forest, or by the sea or a waterfall, can have an
ozone level up to 0.1ppm).
Ions are made from oxygen and air. They are charged particles
which bond to airborne smoke and dust. The particles then
become electrically attracted to each other, becoming heavier
and falling to the floor. Negative ions also help to restore
nature’s ion balance and can enhance natural health and well
being. (Fresh country air has a negative ion level of 3,000 per
cm3, and air near waterfalls of 100,000 per cm3. A stale house
or office has a level below 100 per cm3).
Commercial Air Purifiers help create indoor conditions which
are like those found in the healthy outdoors. When used
correctly, the ozone and ion levels created by Air Purifiers
are similar to those found in healthy outdoor environments.
Commercial Air Purifiers can provide four key benefits: - Deodorise cigarette smoke, food odours, body odours, etc. -
Control microbes such as bacteria, viruses and moulds. -
Remove airborne dusts and smoke particles.
-
Restore nature’s ion balance for natural health and wellbeing.
High technology products for improving Indoor Air Quality
(smoke, odours, dust, germs and ion balance). Ideal for the
Hospitality Industry and commercial buildings such as offices,
shops and all types of air conditioned spaces. For example,
these products can transform a smoky and smelly bar area into
a clean and fresh environment. This is easily the most cost
effective solution of any known technology.
These products are generally mounted in the ceiling space of
the building. When the building is air conditioned the Ozone
Installer will connect the Purifier to the air conditioning system.
This duct dosing method is an excellent technique for ensuring
cost effective and efficient distribution of purified air into the
air conditioned space. There are a number of options for
connecting Purifiers to air conditioning systems and Ozone
Installers are trained, and have extensive technical back up, to
help you select the best method.
CF1 models are specifically designed for connection to duct
work or hose. Model CF2 is designed for connection to a
ceiling grille, or it can be mounted on the wall or even on the
floor. Any commercial building - either air conditioned or not
- can achieve dramatic improvements in Indoor Air Quality.
How Ozone and Ions Work
Ozone and Ions are very effective when
generated together. Unfortunately, cheap
products make only one or the other. A
recent international study has shown that
ozone and ions are four times more
effective at air purification, than either one
of these on its own.
Model CF1 - CF1-1500,
CF1-4000,
CF1-8000
This diagram shows the conceptual layout for a Duct Dosing
system. The CF1’s outlet is connected to the supply duct of an
existing ducted air conditioning system. The only new products
needed for an existing system are the CF1 and EZ3 shown in
blue. This supplies purified air with a uniform distribution to
the treated space. In this way, only a single CF1 needs to be
used to purify a large complex space with many rooms. This is
dramatically more cost effective than multiple ionisers or
electrostatic precipitators or filters. Often, a single CF1 will
provide a better result than up to five of these conventional
devices.
The ozone and ions first purify the air conditioning ducting.
They then enter the space and purify both the air and the surfaces
in that space. They then exit through the return duct. The EZ3
Controller adjusts the ozone level in the occupied space.
Various options exist and are selected by your Ozone Installer,
based on the Oztec Service (see next page).
The EZ3 Controller acts like a
thermostat and automatically turns
the CF1 Purifier on and off to
maintain a constant ozone level.
The package includes a measuring
instrument with indicator light,
adjustable set-point, control station
and low voltage cable.
Simply plug the Purifier into the
control station, which in turn plugs
into the mains power.
The whole system then automatically
reacts to the varying pollutant load in
your premises.
The CF1 is rich with great features, many of which are truly
unique:
Combination ozone and ion electronics. This achieves the
four benefits of control of odours, microbes, dust and ion
balance.
Electrical certifications, including EMI (no electromagnetic
interference is caused to affect TV reception, mobile
phones, etc).
Patented Plasma Ozone Emitters, featuring a wafer thin
silicon alloy laminate - microchip technology. Also the
active electrode is removed entirely from the airstream.
Safety microswitch, activates if emitters removed.
Extra long-life design. Our components have a design life
up to 10 times greater than that of cheap alternative
products.
In-built circulation fan with two-stage inlet filter.
Long life Plasma Source/Ion Source, which modifies
voltage, frequency, wave shape, etc. Fully enclosed and
impervious to moisture and corrosion.
Two 100mm spigots for connection to hose or duct.
Three-layer laminate case for long life. The first layer is
plastic for electrical insulation, followed by metal for
robustness, then finished with a corrosion-resistant polymer
coating.
Variable ozone output, switch controlled.
Cyclical timer, allowing programming to turn on and off
repeatedly in any combination. Ideal for dosing at a high
rate at night and a lower rate during the day.
Model CC1
The CC1 is ideal for smaller jobs such as connecting to ducting
in the ceiling space of a hairdresser or nail salon or small office
or shop. It includes the same dual ozone and ions output, of
course. The ozone emitter configuration can be varied to
achieve different output levels.
The CC1 includes the same seven key features of the larger
CF1 models (see previous page, numbered 1 to 7). But they
are packed into a small and cost-effective case. The CC1 is an
unbeatable combination of safety and performance.
Model CF2
Alternatively, the CF2 can be portable (with wheels and
handle). Or it can be wall mounted. This is useful when there
is no ceiling space which can be used.
The CF2 includes a pleated cartridge filter and high flow fan.
It generally mounts to the OE2 Ceiling Grille, resulting in a
neat and compact system: filter, fan, plenum, ozone and ions.
This system does not need to connect to existing air
conditioning ducting. Rather, it is a stand alone or independent
system. The CF2 is a truly unique product with many features:
Inlet filter with massive 50,000cm2 area.
Powerful fan with high flow rate: 150 litres/second.
Combination ozone and ion electrics (rather than just one
or the other). This is essential to yield all four benefits:
the control of odours, microbes, dust and ion balance.
Output of 1,500mg/hour, designed to suit a single output
point, such as the ceiling grille.
Oztec Service
Ozone "wrote the book" on Commercial Air Purification.
Extensive documentation includes Issue Papers for end-users
and Distributor Guides for approved distributors. Ozone
Installers are trained to assist with your product selection and
installation techniques.
For larger complex jobs the end-user fills in a Fact Finder.
Ozone then generates a Sizing Report and when required refers
to Oztec - a computer database which records our extensive
experience and research.
Ozone is made from life-giving oxygen. The ozone permanently
removes odours by a process of oxidation and microbes by a
process of protein restructuring. Then, when it has done its
job, it automatically converts back into oxygen again. Ozone
is nature’s own powerful purifier. The ozone layer is essential
for life on earth and protects us from ultra violet rays. The
clean, fresh smell evident after a lightning storm is ozone.
(Fresh air in a forest, or by the sea or a waterfall, can have an
ozone level up to 0.1ppm).
The EZ3 Controller acts like a
thermostat and automatically turns
the CF1 Purifier on and off to
maintain a constant ozone level.
The package includes a measuring
instrument with indicator light,
adjustable set-point, control station
and low voltage cable.
Simply plug the Purifier into the
control station, which in turn plugs
into the mains power.
The whole system then automatically
reacts to the varying pollutant load in
your premises.
